Enfield, Bullet, Leather Jackets

Regularly cleaning a leather motorcycle jacket is an essential procedure to keep it looking its best. Leather suites, boots, pants and jackets can cost literally thousands, so it’s worth a little additional time and effort to maintain the beautiful finish. A high-quality leather jacket can easily begin to dry out and crack if the proper care is not provided. The actual procedure for cleaning and conditioning the bike equipment is rather easy. Additionally, the jackets that are well-maintained are more supple which means they’re more comfortable to wear and easier to put on and take off. An perfect time-frame to clean the leather motorcycle jacket is every 3 or 4 months.

What’s involved in the cleaning procedure?

Initial cleaning

Before starting the cleanup process, you need to discover a convenient spot to hang your leathers. Use a coat hanger and make sure there is sufficient space to work. Start the cleaning procedure with a bowl of hot soapy water. Steer clear of harsh detergents or washing up liquid, and rather use a gentle soap very similar to a shower gel. Give the jacket a good wipe down with a microfiber fabric or similar to make sure it is totally clean.

Leave to dry

Once the jacket is fully clean and all signs of dirt have been removed, leave it in an open area to air dry. Do not use a tumble dryer, hair drier or other heated appliance to speed things up. Heating leather based clothes can increase the risk of the substance shrinking, splitting or cracking.

When the coat is dry, you’re ready to begin on the conditioning step. It is always important to complete the initial cleaning to remove the dirt. If you go directly to conditioning, there’s the risk of trapping the dirt that could result in a quite atrocious look.

Apply conditioner

Apply a high quality leather conditioner that easily absorbs into the leather to be certain it does its job well and gives long-term protection. Massage the preferred conditioner all around the jacket using your hands or a dry cloth. Give the seams and stitching particular attention because these areas are more vulnerable to cracking or rotting in the future. After a fantastic coating is used, leave the jacket overnight to dry. At first the leather material may feel a bit oily, but once the conditioner is fully absorbed, it should look wonderful.